Satellite Dishes - used hd fta satellite receiver

Featured Products


Free shipping

DMYCO Satellite Receiver, TV Receiver Digital FTA TV Satellite Finder DVB S2 LNB Tuner SAT Decoder Support Full HD 1080P H.265 MPEG-5 PVR YouTube (D4S Pro) by DMYCO

  • ▶ NETWORK SHARING: Support YouTube, Youporn, Redtube, Via USB WiFi....
  • ▶WORRY-FREE GUARANTEE: We support 30 Days' Money-back Guarantee and...
  • ▶ HIGHLIGHTS: Fully compatible with 7-day Electronic Program Guide,...

Product Description

Please Note:
This device need to work with satellite dish, please make sure it have connected with your satellite dish and TV. Then please turn on the device, find the "dish setup" - "satellite list"(choose all the satellites) - "multi SAT search"(choose blind search) start searching.
If you want the TV channels of one specific satellite, please input the satellite's parameters by yourself in the satellite list( , you can find the satellite information and the corresponding TV channels in this link), then choose the one satellite in "satellite list", and choose "single SAT search". start searching.

✔Support multiple LNB-Switching control (supports DiSEqC1.0/1.1/unicable/1.2/1.3(USALS)
✔Support NIT search
✔Support MPEG-5
✔Support ACM/VCM
✔Support HDMI 1.3
✔Support PVR(store in USB disk); Multimedia files playback(by USB)
✔Support Electronic Program Guide(EPG) for 7 days; Teletext and subtitle out through OSD
✔Support multi-lingual DVB subtitle and teletext
✔Support parent lock

OSD in many languages and 32 bits skin
support Multilingual support on screen menu (OSD): English, French, Deutsch, Italian, Spanish, Swedish, Danish, Greece, Portuguese, Finland, Holland, Turkish, Czech, selectable
High light LED Display
Multiple display mode: 1080p/1080i/720p/570p/576i/480p
MPEG-2 / H.264/H.265 Hardware decoding
Video text Decoder
Analog audio output: stereo(L+R); Digital audio output: S/PDIF by coaxial and optical
S/PDIF Interface for digital bit stream out (AC-3)
YCbCr available; Screen format: Auto, 4:3, and 16:9
Upgrade software through USB 2.0 port
CA 1x slot, 10/100Mbit Ethernet Interface, Directly bouquet-lists, Support WEB TV

Package List:
1 x D4S Pro DVB-S2 Satellite TV Receiver
1 x Remote control
1 x Power Supply
1 x HDMI Cable
1 x User Manual


Free shipping

AGPtek Good For Campers Digital Satellite Signal Meter Finder Meter For Dish Network Directv FTA LCD Graphic Display Backlight Compass Buzzer Control by AGPTEK

  • Built-in amplifier compensates insertion loss
  • Powered by the receiver, nice tool for campers. PS: work great with...
  • High quality component. Anti-corrosion connectors

Product Description


Very powerful Digital Satellite Signal Meter Finder which is able to find satellites in a very quick way about within 15 minutes if no accident. It is very lightweighted and compact,very convenient to use.Anti-corrosion connectors also make sure long time use and it is very worthy of trying.

Input Frequency: 950-2150 MHz
Input Level Min: -40dBm
Input Level Max: -10dBm
Input Impedance: 75Ω, F connector
Output Impedance: 75Ω, F connector
Power Supply: DC 13/18 V
Operating Range (LNB gain): 52-60dB

Package Included:
1* Instructions
1* Digital Satellite Signal Meter Finder
1* Compass for free

Q &A:
1. how to install the satelite finder and detect the signal?
a>. Connect a jump cable from LNB to the satellite finder's "Satellite" port. Connect the "Receiver" port, a DC 1318V power which comes from the satellite receiver
b>. Make sure that the satellite finder is properly connected. Plug in the AC cord and turn on the satellite receiver
c> Set the dB to be 1 or 2 by ATT button, the signal LED will show from 15 to 30, then you can adjust the dish postition, when you hear the buzzer alert and the value of signal strength getting more and more, it means you get the statellite signal
d>. Set the dB to be 3 or 4, adjust the dish again and again until the value of the signal strength is maximum. Then you can see the LOCK light in the satellite receiver, if the lock light is lighting it shows you find the desired satellite. Otherwise you need to adjust the dish again


Free shipping

THE CIMPLE CO - 50' Feet, White RG6 Coaxial Cable (Coax Cable) | Made in The USA | with Connectors, F81 / RF, Digital Coax | AV, CableTV, Antenna, and Satellite, CL2 Rated, 50 Foot by THE CIMPLE CO

  • High frequency range with an 18 AWG center conductor to cover...
  • Low loss cable for exceptional signal and picture quality, even...
  • Tested and approved for the use with Cable Modems, Televisions,...

Product Description

THE CIMPLE CO, A Family Company located in the USA, is proud to manufacture this high quality and durable coaxial cable. This cable is available in Black and White, and comes in lengths from 1 foot to 100 feet (including our most popular lengths of 6 feet, 15 feet, 25 feet, 30 feet, 50 feet, and 100 feet). The center conductor is made of high grade copper coated steel that has been swept to 3.0GHz, making this a great application for Satellite, Cable, Wireless (including cell services), and Communication uses. With very low signal attenuation (2.75dB at 750MHz for our 50' cable) it can be used on long runs without the loss of signal or picture. We use high grade 360 degree compression connectors to ensure that this cable remains water and weather proof, without the loss of any signal. This ensures that the ends can withstand pulling, weather, extreme hot and cold (rated up to 167 degrees F). The coaxial shielding is 60% aluminum magnesium alloy braid and 100% solid aluminum foil (including an 18% overlap) to ensure that there is no interference from neighboring or rouge signals. The outer jacket is a flexible UV resistant PVC and has been tested to be used in many extreme conditions for use both inside and outside. The dielectric center is made from gas injected foam PE and has an almost perfect consistency of 75 Ohms +/-3 throughout the entire length of the coax cable. The outside diameter of the cable is 0.27 inches, about 6.85 mm, with the connectors being slightly larger at .4375 (7/16) of an inch (11.11 mm). The cable also has length markings every two feet on the side to make it easier to cut to length, if you need a shorter wire. We also offer a repair and splice kit for those who would like to cut and reinstall the ends on the wire. The kit comes complete with instructions and free technical support. We back our product 100%, with free returns, as well as free technical and customer support.


Free shipping

Replacement for Dish Network Legacy Dual LNBF by Lava

  • Dual Output - HD Compatible
  • Replacement for Dish Network Legacy Dual LNBF
  • Use with dish that needs "D" shape LNBF mount (such as Dish 300 or...

Product Description

This "D shaped" ku Band Legacy Circular Dual output LNBF with Dual polarization. This LNBF is high gain, low noise and shock resistant. It works with all circular polarization ku band satellites. Great choice for 61.5, 72, 77,82, 91, 101, 110, 119, 129, 148 signals. Fits Dish 300 (need 1 LNBF) and Dish 500 (needs 2 LNBFs). Can also be used with Dish 1000 if you have the correct yoke (needs 3 LNBFs).


Free shipping


  • Dual Output - HD Compatible
  • Use with dish that needs "D" shape LNBF mount (such as Dish 300 or...
  • It works with Dish Network and Bell satellite receivers.

Product Description

This "D shaped" Legacy Dual output LNBF is high gain, low noise and shock resistant. Great choice for 61.5, 72, 77,82, 91, 101, 110, 119, 129, 148 signals. Fits Dish 300 (need 1 LNBF) and Dish 500 (needs 2 LNBFs). Can also be used with Dish 1000 if you have the correct yoke (needs 3 LNBFs).

x2 premium HD FTA receiver premium HD x2 FTA RECEIVER FTA

X2 PREMIUM HD FTA receiver . Excellent blind scan and HD resolution. Great software upgradable!

4K Has Come a Long Way, Has Farther Yet to Go - TechZone360 - Techzone360

The 4K Ultra HD market is developing faster than anyone thought that it would—with TV shipments escalating, more and more content availability and advances being made in compatible home set-top boxes. That said, there are certain arenas that still need to follow suit with adaptability and preparedness for this expanding space, like content security, and delivery mechanisms that can address...


DTT user guide: DigitalTV in your home - News24

South Africa is about to begin its journey to a purely digital TV world. During this time, TV-owning households will have to switch from analogue transmission (received through an aerial) to digital (through a decoder and possibly an aerial). The key here is the decoder.

Who is digital terrestrial television (DTT) compliant?

Some homes already have decoders...


Bing news feed


    07/06/15 ,via Consumer Electronics Net

    AVIWEST's advanced live video contribution platform enables broadcasters to capture and broadcast live HD or SD video over multiple ... an ultra-portable satellite antenna. When used during satellite transmission, the Cobham antenna provides real-time ...

  • BBC Cuts 1000 Jobs in Funding Crisis

    07/02/15 ,via Daily Kos

    The BBC now has to pay for the World Service from the licence fee income rather than the block grants it used to receive ... have a means of receiving HD transmissions so will not need an extra tuner or box - the main satellite provider, Sky and the ...

  • CSULB’s K-Beach fundraiser a massive success; The Sound counts competitor’s commercials

    07/01/15 ,via Los Angeles Daily News

    HD sends ... that used to run on the main channel of The Wave. But what about home radios, I asked. With just a few exceptions, they are not found on the shelves of local electronics retailers. “You won’t find many traditional stereo receivers or ...

Used / Pre-Owned JynxBox Ultra HD FTA Satellite Receiver Version 3 ...
Used / Pre-Owned JynxBox Ultra HD FTA Satellite Receiver Version 3 ...
Image by
Used / Pre-Owned DreamLink HD Digital FTA Satellite Receiver Version 4 ...
Used / Pre-Owned DreamLink HD Digital FTA Satellite Receiver Version 4 ...
Image by
Used / Pre-Owned Freesat 800 HD FTA Receiver w/ SK200 Module
Used / Pre-Owned Freesat 800 HD FTA Receiver w/ SK200 Module
Image by