Dish Network's Newest LNBF For English High Def Sats 61.5 & 72 Use with 1000.2 Dish Works with Hopper and all VIP Receivers The default orbital locations are ports 1 and 3 for 72.7; port 2 for 61.5 • The DPP44 switch is the only compatible switch; the 1000.2 EA LNBF does not work with the DPP33 switch • When using with a DPP44 switch, connect 72.7 to port 1 and 61.5 to port 2
DISH Pro Plus Twin allows you to pick up to 2 satellite locations and distribute them to up to 2 Receivers, either single Tuner or Dual Tuner, Legacy or Dishpro.
This LNBF receives the 119º West and 110º West orbital locations and delivers them to up to two receivers. Either output port can feed on a single cable: - A DISH Pro single-tuner receiver - A DP Plus dual-tuner receiver with a DP Plus Separator - A Legacy receiver (without a DISH Pro Adapter) A third port labeled LNB IN supports reception of a third orbital location delivered from a DISH Pro compatible LNBF. RETAIL PRICE: 9.95 each
Yoke "Y" Adapter for Dish 500. Fits DP Dual LNBs, DP Single LNB, Legacy Dual LNB, DPP Twin LNB, DP Twin, DP Quad Make sure your LNBs have D shaped LNBF feed bracket. LNBs with rectangular shaped bracket will not fit on this adapter/bracket
25 Metres Twin Coaxial Cable - Foam Filled & Pure Copper - 2 x 5mm
Overview - Ideal for running from a dish/LNB to all Sky Plus/HD boxes or Freesat boxes. Once the cable is run, simply terminate it with 'F connectors', also available in our shop. As this cable is pure copper, it is suitable for long distance runs as the signal quality/strength will be maintained.
Suitable for outdoor and indoor use.
Colour - black
Twin coaxial cable, the inner conductor is bare copper, this is surrounded by a foam dielectric, the dielectric is covered in a copper foil and braid.
CSA - 2 x 0.33mm?
Conductor diameter - 2 x 0.65mm?
Conductor Material - Copper
Braid - 2 x 48 x 0.14mm?
Braid/Foil Material - Copper
Cable diameter - 2 x 5mm?
Dielectric - 2 x 4.60mm? Foam P.E.
Impedance - 75 ohms
Velocity factor - 0.83
Return loss 5-400MHz - 30dB min.
Return loss 450-1000MHz - 22dB min.
Return loss 1000-2150MHz - 18dB min.
Attenuation @ 50MHz, dB/100m - 6.5dB max.
Attenuation @ 100MHz, dB/100m - 8.9dB max.
Attenuation @ 200MHz, dB/100m - 12.3dB max.
Attenuation @ 400MHz, dB/100m - 17.6dB max.
Attenuation @ 1000MHz, dB/100m - 26.9dB max.
Attenuation @ 1750MHz, dB/100m - 35.7B max
Attenuation @ 2150MHz, dB/100m - 42.2dB max
How to use - When this cable is being attached to Fonnectors, the cable should be stripped, the earth wrapped around the PVC jacket and inserted carefully into the connector ensuring a good connection is made.
We also supply a wall plates that can be used with this cable, please look through our shop. If you require help, technical support can be given free of charge
How to Install a Quad LNB on a Sky Satellite Dish. ***** http://www.tvtrade.ie/satellite-dishes.html ***** http://www.facebook.com/TvTrade.ie.
You don’t need a machine with a Freeview tuner. In fact, you probably don’t need a machine at all. However, you may still want to buy one …
In the old days, people who wanted to record TV programmes bought a VCR or video cassette recorder to connect to their TV sets. The VCR had its own analogue TV tuner, so it didn’t actually record from the TV: it recorded programmes from the...Source: www.theguardian.com
If you’re a television consumer at all, you’ll have seen adverts for the new Altech Node. You may even be considering getting one. In a nutshell, it’s a set-top box which plugs into your TV and gives you access to a multitude of interactive content and a variety of video on demand (or VoD) such as movies and television series.
If you already have DStv and therefore a satellite dish,...Source: gearburn.com
MaxLinear’s standard software stack includes EN50494/EN50607 and a comprehensive list of operator-specific protocols, as well as dish alignment ... and dual wideband IF outputs (200 MHz to 2350 MHz) to dramatically simplify the LNB front-end design.
MaxLinear’s standard software stack includes EN50494/EN50607 and a comprehensive list of operator-specific protocols, as well as dish ... LNB is a great example of that commitment.” The MxL801 RF IC is part of the MxL80x product family of dual Ku ...