Note:1. WS-6916 Digital Satellite Signal Finder Meter is for free digital signal finders only. It can't search those signal finders which are charged.
2.The system can be upgraded to search the updated satellites via USB port. The system is used to search the US satellites, but it can search EU satellites via system update. However, two systems can not exist in the same time. Please email us before you upgrade the system, we will provide you with detailed instructions.
3.5 Inch High Definition TFT LCD Screen
Fully DVB-S/S2, MPEG-2/MPEG4 compliant
MPEG-2 / H.264 Hardware decoding
Digital meter for signal strength and quality
Supports for multiple TP detection
Supports scan of Auto,Blind,Manual or NIT
Sound and Light Alarm for Locking Signal
Auto Calculate Angle of AZ ,EL
Supports DISEQC 1.0/1.1/1.2 ,0/22khz Tone Speaker Integrated
Support both AV out and AV in
Supports HDMI out
LNB short protect
7.4V/3000mAh Li-ion Battery Included
Easy to carry.
Simplified MENU OSD Instruction:
After power on, press ok into the main menu and start to set below functions:
For OSD Language/Channel Name/Band Width/ Carrier/ Modulate/FEC/Guard Interval/Output Level/Signal Source functions setting: You can press◀▶;to change or select them.
For Frequency setting: You can press◀▶ move cursor and press ▲▼ key to change numbers.
For Key Tone setting: press◀▶o ON/OFF.
For Service Provider/ Program Name setting: just input the name is ok.
For Factory Setting: press OK to confirm.
After setting above, you can use it normally. For detailed instructions, pls refer to the user menu.
Note: If you have any issues in using it, please don't hesitate to contact us via E-mail. We will provide you with excellent services.
As a convenient satellite validated tool, the technical index has surpassed the mid-range Digital Satellite Searcher.
Support language: English, French, Farsi, Russian, Arabic, Portuguese, Turkish.
3.5 inch High definition TFT LCD Display
Support both AV out and AV in
Support Auto Satellite and PID Search
Measurement type: strength\quality; bit error rate
Input Frequency Range: 950 to 2150MHz
Input Level:-65to -25dbm
Supports DISEQC 1.0/1.2, 0/22Khz Tone
Both lock light and beep for the indicator of signal
3 Operation Modes: Digital TV; Digital Radio; Favorite
EPG for on Screen Channel Information
Easy Graphic Menu Interface
RS232 port for software upgrades
8.4V/3000mAh Li-ioN Battery included
Max operating time: 4 hours
1 X WS-6906 Satellite Finder
1 X Black Protective Bag
1 X Strap
1 X USB Upgrade Cable
1 X Car Charger
1 X Power Adapter
1 X AV Cable
1 X English User Manual
1 X CD
1.WS-6906 Satellite Signal Finder Meter is only used for satellite signal strength measuring.
The strength of the satellite signal is depended on the area you are in instead of our WS-6906 Satellite Signal Finder Meter.Besides, WS-6906 Satellite Signal Finder Meter is only used for free satellite signal finder and SD TV signal finder.
2.If you have issues when using WS-6906 Satellite Signal Finder Meter, such as it doesn't work, pls don't hesitate to contact us via E-mail, we will provide you excellent in-line service to solve the problems. Your satisfaction is our goal.
3.WS-6906 is not capable for dish hybird system，dishnetwork satellites，directv SWM dish, and analog signal.
Description : SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass Features : Professional digital LCD satellite finder. With it, the digital satellite finder can automatic search, you can get professional satellite singal performance & results without a second helper. Built-in light & electric buzzer. Bulit-in compass. LED backlight display. LNB connecting port and receiver connecting port. Specification : Input Frequency : 950-2150 MHz. Input Impedance : 75O hm, F-connector. Operating Range : LNB Gain : 52 - 60 dB . Input Level Min : -40 dBm . Input Level Max : -10 dBm . Output Impedance : 75 Ohm, F-connector . Power Supply : DC 13 - 18V . Weight : 5.25 oz (150 g) . Color : Gray. How to Connect : 1. Connect a jumper cable from the LNB to the "Satellite" port on the digital satfinder. 2. Connect the cable from the satellit receiver to the "Receiver" port on the digital satfinder. Operation : 1. Switch the satellit receiver on, the digital satfinder will on by itself . 2. Set the dish to the proper azimuth and elevation settings. 3. Adjust the knob until the signal strength display at 0%. 4. Peak the signal by slowly moving the azimuth and elevation of the dish. Adjusting the incoming signal to the suitable level by pressing the "ATT" keys. Continue to move the dish until you have the highest possible meter reading and the highest possible buzzer pitch. 5. Remove the jumper cable and digital satfinder and reconnect the LNB/LNBF to your receiver. Package includes : 1 x LCD Digital Satellite Signal Meter Finder 1 x User Manual Details pictures :. If there is a size or colour choice please email me with your choice or it will be sent at random.
- Transmission Standard: DVB-S/S2
- Antenna connection: F-Type
- Frequency range: 950-2150 MHz
- Signal level: -65 dBm~-25 dBm
- LNB Switch: 22KHz
- LNB Voltage: 13/18 V, max 300 mA
- Demodulation: QPSK
- Symbol Rate: 2
- LCD Type: FSTN positive transflective
- Number of Dots: 128x64
- Active Area (WxH): 59.6x43 mm
- Connector: USB
- Data Protocol: USB to RS232
- Li-ion Battery: 8.4V 800 mAh
- Power Supply: Output DC12V/1A; Input 100-240V AC 50/60Hz
- Power Consumption: Max.5W
- Dimension: 8cm x16cm x4cm
- Net weight: about 250 g
- 1 x WS-6933 DVB-S2 DVB-S HD Satellite Finder
- 1 x Power Supply
- 1 x USB Cable
- 1 x Silicone Case
- In Retail Package
1.WS-6906 has a GREEN "LOCK" indicator light to positively ID the satellite you are looking for.
2.Channel picture, signal strength and signal quality can be showed on LCD Screen after you set up your local DVB-S Parameter.
3.Using the parameters of satellite, you can set and align a satellite dish quickly.
4.WS6906 Meter can easily and accurately aim your dish plus View the channel while aiming the dish.
5.It includes high capacity Lithium Battery 3000mAh which works for more than 4 hours after fully charged.
- 3.5 inch High definition TFT LCD Display
- Fully DVB-S/MPEG-2 compliant
- SCPC&MCPC receivable from C/KU band satellites
- PAL-NTSC auto-conversion
- Support Auto ,NIT and PID search
- Measure Parameters: intensity, quality and bit error rate
- Supports DiSEqC 1.0/1.2, 0/22Khz Tone
- Support both AV out and AV in
- Both light and beep for the indicator of signal locked
- RS232 port for software upgrades
- Built-in speaker
- LNB short protect and alarm
- Easy Graphic Menu Interface
- 8.4V/3000mAh Li-ion battery included
- Max operating time: 4 hours
- 1 x WS-6906 Satellite Finder
- 1 x Black Protective Bag
- 1 x USB Upgrade Cable
- 1 x Strap
- 1 x Car Charger
- 1 x Power Adapter
- 1 x AV Cable
- 1 x User Manual
Update 1/31/2014: Use Discount Coupon Code C555 to get $5 off your next online order at www.SADOUN.com . (Limited time offer). Product link: ...
So, why should we opt for a satellite radio service instead of a traditional AM/FM radio? First of all, it provides a more powerful signal over a larger area – it is said that two digital broadcast satellites are strong enough to cover an area of up to a ...