Satellite Dishes - dishusa.net digital satellite finder meter dish

Featured Products

Product Description

The SAT-TECH SF-9505A is compatible with DISH (Network), FTA, and Directv (not SWM) satellite TV service types. With a digital readout, it makes for easier pointing. Perfect for repointing your home dish or using for mobile satellite TV viewing. Frequency range:950-2150MHz.

Product Description

Specifications
Frequency range : 950-2150MHz
Supply voltage : 13-18V DC
Input level range : -40dBm~ -10dBm
Operating temperature : 0-40
Impedance : 75Ω
Use LCD to display the satellite signal intensity
Built-in signal alert buzzer
With LCD backlight / buzzer and attenuation control function
DC pass to LNB
ATT increasing key. If the incoming signal is too strong, (the thermometer-scales shows max and the signal strength value shows 99) it can easily be attenuated by enabling this "attenuation" funtion, it reduces the incoming signal to a lower level. There are four step attenuation totally.

How to connect
connect a jumper cable from the LNB to the "Satellite" port on the digital SATFINDER.
connect the cable from your satellite receiver to the "Receiver" port on the digital SATFINDER.

Notice
To avoid a continuous full scale reading, do not use the digital SATFINDER directly in front of the dish.
When using a LNB with gain higher than 60dB, insert a 5dB attenuator between the LNB/LNBF and the digital SATFINDER.
In case no satellite receiver is at hand a 13-18V DC power supply with F-connector can be connected on the "Receiver" side of the digital SATFINDER to power the SATFINDER.
The follow link will show you how to use it,Just click it
http://www.youtube.com/watch?v=rbK8wqTo9oY

Package included
1 x SF-95DR Digital satellite finder
1 x User manual

Product Description

Description:

Very powerful Digital Satellite Signal Meter Finder which is able to find satellites in a very quick way about within 15 minutes if no accident. It is very lightweighted and compact,very convenient to use.Anti-corrosion connectors also make sure long time use and it is very worthy of trying.

Specification:
Input Frequency: 950-2150 MHz
Input Level Min: -40dBm
Input Level Max: -10dBm
Input Impedance: 75Ω, F connector
Output Impedance: 75Ω, F connector
Power Supply: DC 13/18 V
Operating Range (LNB gain): 52-60dB

Package Included:
1* Instructions
1* Digital Satellite Signal Meter Finder
1* Compass for free

Q &A:
1. how to install the satelite finder and detect the signal?
a>. Connect a jump cable from LNB to the satellite finder's "Satellite" port. Connect the "Receiver" port, a DC 1318V power which comes from the satellite receiver
b>. Make sure that the satellite finder is properly connected. Plug in the AC cord and turn on the satellite receiver
c> Set the dB to be 1 or 2 by ATT button, the signal LED will show from 15 to 30, then you can adjust the dish postition, when you hear the buzzer alert and the value of signal strength getting more and more, it means you get the statellite signal
d>. Set the dB to be 3 or 4, adjust the dish again and again until the value of the signal strength is maximum. Then you can see the LOCK light in the satellite receiver, if the lock light is lighting it shows you find the desired satellite. Otherwise you need to adjust the dish again

Product Description

Description : SF-95DR Digital Satellite Signal Meter Finder Dish Network Directv FTA BUZZER with Compass Features : Professional digital LCD satellite finder. With it, the digital satellite finder can automatic search, you can get professional satellite singal performance & results without a second helper. Built-in light & electric buzzer. Bulit-in compass. LED backlight display. LNB connecting port and receiver connecting port. Specification : Input Frequency : 950-2150 MHz. Input Impedance : 75O hm, F-connector. Operating Range : LNB Gain : 52 - 60 dB . Input Level Min : -40 dBm . Input Level Max : -10 dBm . Output Impedance : 75 Ohm, F-connector . Power Supply : DC 13 - 18V . Weight : 5.25 oz (150 g) . Color : Gray. How to Connect : 1. Connect a jumper cable from the LNB to the "Satellite" port on the digital satfinder. 2. Connect the cable from the satellit receiver to the "Receiver" port on the digital satfinder. Operation : 1. Switch the satellit receiver on, the digital satfinder will on by itself . 2. Set the dish to the proper azimuth and elevation settings. 3. Adjust the knob until the signal strength display at 0%. 4. Peak the signal by slowly moving the azimuth and elevation of the dish. Adjusting the incoming signal to the suitable level by pressing the "ATT" keys. Continue to move the dish until you have the highest possible meter reading and the highest possible buzzer pitch. 5. Remove the jumper cable and digital satfinder and reconnect the LNB/LNBF to your receiver. Package includes : 1 x LCD Digital Satellite Signal Meter Finder 1 x User Manual Details pictures :. If there is a size or colour choice please email me with your choice or it will be sent at random.

Product Description

Signal Strength is presented graphically on the LCD-display in form of thermometer-scales and in numbers (0-99). It can also present pitch tones (the higher tone the better signal) on the buzzer. The digital satfinder is very sensitive and can detect the weakest of signals , strong incoming signals(powerful satellite, big dishes) can easily be attenuated for better readout .

Package Included:
1* Instructions
1* Digital Satillite Signal Finder Meter

Trademark AGPtek products are marketed exclusively by Brainydeal

Trimax SM 4500 Digital Satellite Finder Meters - Satelllite Finders meter

Trimax SM4500 satellite finder meter. http://sdadish.salesvu.com/detail.php?product=15&category_id=6 Only $327.00+ shipping, SDAdish is an authorized ...

---